JOSKIN VOLUMETRA 14500D

JOSKIN

VOLUMETRA 14500D

Neuf

T40402/145

JOSKIN VOLUMETRA 14500D Specification details 3657W-22 1.00 ST VOLUMETRA 14500 D slurry tanker with volumetric spiral pump 1775 1.00 ST Wheels base: 1.820 mm instead of 1.550 mm with Hydro-Tandem or Hydro- Tridem (FORBIDDEN with fixed axles) - COMPULSORY for wheels with a Ø from 1.601 to 1.675 mm 114 1.00 ST Air brakes in proportion to the load for vehicle with hydraulic axle suspension (air brakes compulsory) 935 1.00 ST 2 LED rear working lights (with control box in the cabin) 1448 1.00 ST LED end outline marker lamps and side marker lights 110 1.00 ST Wide angle P.T.O.-shaft (1 side) (Walterscheid) 324 1.00 ST Hydraulic device (DA) automatically stopping the filling process including 1 electrovalve and the electric control box in the cab to open the valve between the pump and the tank (ref. 2623 on MODULO2 compulsory) (level float gauge compulsory) 154 1.00 ST Level float gauge instead of standard indicator 016 1.00 ST Extra Ø 6" (150 mm) flanged opening (wherever on the tank - when ordering please join a plan) 025 1.00 ST Ø 6" (150 mm) filling valve with Perrot rocking jaw 1782 4.00 ST Low-flow electro-hydraulic control - everything except hydraulic motor (macerator, turbo, chopper) (entry block compulsory) - per function 1476 1.00 ST Rear bumper KHEU40-20 1.00 ST European certification for 20 T maximum permissible weight on the axles (+ 3 / 4 T on the eyelet) at 40 km/h for double-axle vehicle (cat. R) 3805 2.00 ST Wheels 750/60R26.5 (BKT) FL630 Super 180 D (Ø 1.574 x 754 mm, 10.880 kg per wheel at 40 km/h and 4 bar) instead of 400R22.5 3153 1.00 ST Air brakes with spring-brake actuator instead of standard parking brake (air brakes compulsory) 3151 1.00 ST §JOSKIN Ø 80 mm knee-joint eyelet 4 T instead of 3 T (large plate) 3406 1.00 ST Spiral pump W130 (4.500 l/min at 540 rpm) - for Ø 8" pumping circuit with stone trap integrated in the pump - instead of W120 3411 1.00 ST Upper manhole (Ø 520 mm) with manual opening - not airtight - including inner and outer ladders and pre-equipment for hydraulic opening - incompatible with ref. 1322 (weight transfer partition) 3412 1.00 ST Ø 520 mm manhole with hydraulic opening instead of mechanical opening (ref. 3411 compulsory) - incompatible with Vacu-STORM or ref. 1322 (weight transfer partition) 3734 1.00 ST Pre-equipment for not built-in front JUMBO (Ø 200 mm) on VOLUMETRA 5381 1.00 ST 540 rpm drive with reduction gear - not recommended if the tractor has a P.T.O-shaft whose rpm cannot be lower than 1.000 rpm 5423 1.00 ST PENDISLIDE-PRO pre-equipment for COBRA2, TETRAX, QUADRA, EUROLINER and VOLUMETRA (WARNING: special drain hose to be fitted on the tractor free return) - including AUTOMATE 1+4 kit instead of the rear valve and standard scatterer 5476 1.00 ST AUTOMATE 1+5 instead of AUTOMATE 1+4 (compulsory on PENDITWIST from 15 to 18 m for hydraulic rams to secure the boom wings in transport position - unavailable from 9 to 13,5 m) 5503 1.00 ST Simplified closed-circuit hydraulic drawbar instead of sprung drawbar or drawbar with silent-blocks (2 nitrogen accumulators - suspension when vehicle loaded) incompatible with weight transfer (ref. 305) 5505 1.00 ST Price reduction for no inner and outer ladders (upper manhole with hydraulic opening and only if there is an access to clean the tank - unavailable with upper hydraulic access)