2026 ROME DTR539

2026

ROME

DTR539

Neuf

Deep Tillage Ripper - For Use with Tractors in the 450-600hp Range. FEATURES: • The abrasive resistant alloy steel shanks, flame cut to a parabolic curve, will shatter the toughest hardpan to a depth of 39" (610 mm). • Shanks set at 32" (813 mm) spacing with shear bolt protection. • T1 wear strips and armor cover the entire shank and are easily replaceable • Fabricated hard-surfaced points are standard. • Designed for maximum clearance and weight transfer to drawbar of tractor. • The hitch, mainframe and shank holding plates are well braced and designed to alleviate lateral and torsional stress and are all low hydrogen welded. 5 Shanks, 39" Max Penetration, 11'5" Transport Width, 16' Overall Width, Net Weight: 14,678lbs. NOTE: This subsoiler requires hydraulic control. Two rear tractor hydraulic circuits required for subsoiler operation. Standard Equipment: • Center “V” frame is all welded box type construction made of 6” (152mm) x 8” (203mm) x 3/8” (10mm) rectangular tubing with 1/2” (13mm) x 6” (152mm) fishplates. • Parabolic curved shanks are 1-3/4” (45mm) x 11” (279mm) x 42” (1.1m) 360 Brinell alloy steel with splitters and replaceable fabricated hard-surfaced points. • Bolt on hard surfaced fabricated points for shanks. • Shear bolts are 1-1/4” (32mm) x 6” (152mm) grade 5. • Two – 22.5 Super Single tires. • Hydraulic control group includes one 5” (127mm) x 12” (305mm) drawbar cylinder, two 5” (127mm) x 20” (508mm) transport cylinders, hoses, and quick couplers to reach the rear of the tractor. • Cylinder lock assemblies for each cylinder rod keeps cylinder from retracting if pressure is lost while transporting. • Depth gauge rod provides leveling (frame) adjustment.